Orientek FTTH Tool Kit T45 Fusion Splicer with OTDR Combos SV20A SM 1310/1550nm T25M Optical Power Meter T10 VFL 5KM | Мобильные

 

 

Orientek T45 Fusion Splicer with SV20A OTDR SM OTDR 1310/1550nm + OPM+VFL

 

1. Fusion Splicer Specification   Alignment method 
Precise core alignment and cladding alignment Applicable fibers
Any common optical fibers.rubber-insulated fibers and jumpers that meet requirements of ITU-TG.651~653,ITU-TG.655 and ITU-TG.657 Optical fiber diameter 
Cladding:80~150mm,coatinglayer:0.1~3mm Cuttling length 
5-16mm (coated optical fiber diameter≤250μm);10mm(coated optical fiberdiameter:0.25~3mm) Fusion splicing consumption (typical value)
0.02dB(SMF);0.01dB(MMF);0.04dB(DSF);0.04dB(NZDSF) Retum loss 
Better than 60dB Fusion splicing time(typical value )
7s Heating time(typical value) 
18s Pulling force test 
1.96~2.25N Thermal shrinkagetube
60mm,40mm and a series of thermal shrinkage tubes Graphical display 
High-performance 4.3 inch lcd Magnification time 
320 times/88 times Fusion splicing record 
10000 groups Battery capacity 
11.1V,6800mAh,typical value offusion splicing and thermal cycle is 330 times Battery servicelife 
Cycle charging times reach 300-500,can be replaced by customers Electrode servicelife 
Typical value is 4000 times,can be replaced by customers Construction lighting 
Built-in lights with high-brightness and wide lighting area Working environment 
Temp:-10~50℃;hum:0~95%RH,height above sealeve1:0~6000m Operation interfaces 
GUI graphical operation interfaces Extemal power
AC:AC100~240V,60Hz,0~1.5A,DC:DC10~15v Extemal port 
USB/SD Dimensions
120mm(W)×130mm(H)×154mm(D),(without rubber anti-vibration pad)        Weight 
1.59kg(host engine).0.37kg(battery)    

2: SV20A OTDR Specification   Model SM OTDR TR600 SV20A    Wavelength(nm) 1310/1550 Dynamic range(dB) 32/30 Pulse width (ns) 5,20,40,80,160,320,640,1280,2560,5120,10240,20480 Display 5.6 inch TFT LCD touch screen Event blind zone (m) 3 Attenuation blind zone (m) 13 Linearity (dB/dB) ±0.05 dB/ dB Loss threshold (dB) 0.05 Loss resolution ratio (dB) 0.01 Sampling resolution ratio (m) 0.125 to 8 Sampling point 32k Distance uncertainty (m) ±(1 m + 5×10-5× distance + sampling interval) Distance scope (km) 0.3 to180 Memory capacity of trace SD Card (4G), > 10000 pieces Duration of measurement Defined by user; 5sec, 10sec, 15sec, 30sec, 1min, 2min, and 3min are selectable Optical interface FC/UPC+SC/UPC+LC/UPC Data interface USB interface, SD card interface Visual Fault Locator Available Power supply Lithium battery; continuing working duration ≥ 8 hours Warranty period 12 months

3: Mini Optical Power Meter 

 

T25M Optical Power Meter

① Wavelength : 800 ~1700 nm
② Detector : InGaAs
③ Measurement Range : -70~+3 dBm
④ Resolution : 0.01 dBm
⑤ Connector : FC+SC+ 2.5mm universal (1.25mm for LC is Optional)
⑥ Power Supply : Alkaline Battery(3 AA 1.5V)