DSP 57 two-phase | stepper motor driver PAS2-57508 DC80V 4.5A high-speed type Дом и сад

DSP 57 two-phase | stepper motor driver PAS2-57508 DC80V 4.5A high-speed type Дом и сад

This drive is the latest technology, high performance based on high-speed DSP chip drives, characteristic of the current vector control technology makes the motor running smooth, special recommend suite is good, the acceleration performance is strong, torque is greater than the traditional technology drive, pulse of mutation or frequent commutation adaptability is strong, not easily jammed or out of step, adapted to the high needs of occasions. Maximum frequency: 2M.

Feature

Voltage: DC 80V-24V, current 1.0-4.5a adjustable, fine fractional steps :200, 400, 800, 1600, 3200, 6400, 12800, 25600, 1000, 2000, 4000, 5000, 8000, 10000, 20000, 25000. Suitable for all 2-phase stepper motors under 57 and 6A, this driver has excellent high-speed performance, stable operation, minimal noise and vibration, and automatic half flow. There are also special functions such as self-check operation, smooth pulse, motor inertia selection, pulse filtering (anti-interference), etc. (the user chooses to turn it on or off).

Cooperate with our 57-5 a two-phase stepper motor test, the highest light can run up to 5000 RPM, 1600 RPM can drive nc machine stability work. Because it is can be as high as 80 v high voltage power supply, so have a good high speed performance, suggest using 36 v power supply transformer and rectifier filter plate do (36 v after rectifying filtering, dc voltage can reach DC50V), each motor according to the computing power is 150 w.

Size 118 x76x35. 4 mounting holes on both sides, diameter of holes is 3mm, center distance of holes: short distance is 23mm, long distance is 113mm. Weight: 0.3kg, differential signal port input, high-speed optocoupler isolation.