3D Printing Night Flight LED Lighting Kit for DJI Mavic 2 Direction Navigation Spot Light Headlight RC Drone Accessories | Электроника

3D Printing Night Flight LED Lighting Kit for DJI Mavic 2 Direction Navigation Spot Light Headlight RC Drone Accessories | Электроника

Please pay attention to the detailed introduction before placing an order

Drone Modified Kit Feature:

1. The hand-held gimbal modification kit is used for for DJI Smart Controller Mavic 2 PRO & Zoom Drone and is formed by 3D printing technology, 2. The plastic material is covered with a sponge to prevent abrasion at the part in contact with the body, 3. Reserve a 1/4 tripod connector at the bottom, which can be transferred to a tripod, 4. The remote control bracket with screen can be used as a screen bracket alone, which is very convenient for watching videos, 5. This model is dedicated to DJI's remote controller with screen, not applicable to other remote controllers.

Description:

Material: Plastic Applicable models: for DJI Smart Controller Mavic 2 PRO & Zoom Color: Black Net weight: 100g Packing list: 1set Drone Modified Kit

Note:

1.Does not include the DJI Smart Controller Mavic 2 PRO & Zoom Drone and tripod, 2.Transition: 1cm=10mm=0.39inch, 3.Please allow 1-3mm error due to manual measurement. please make sure you do not mind before ordering, 4.Due to the difference between different monitors, the picture may not reflect the actual color of the item,please make sure you do not mind before ordering, Thank you!

Bandheld Bracket Feature:

1. For MAVIC 2 handheld gimbal conversion kit, formed by 3D printing technology; 2. Plastic material, sponges are attached to the parts where the body contacts to prevent wear; 3. Reserve a 1/4 tripod connector at the bottom, which can be transferred to a tripod.

Description:

Material: plastic Applicable models: for DJI Mavic 2 Color: Black Net weight: 65g Packing list: 1pcs Drone handheld shooting bracket Note: Does not include Drone, remote control, mobile phone and tripod

Battery Buckle Feature:

1. The battery drum pack anti-shedding buckle is made of 3D printed one-piece plastic material, 2. Adopt double-screw locking to enhance safety, and elastic sponge paper is attached inside so as not to hurt the body, 3. The function of this accessory is to hoop the battery to prevent the Mavic 2 from flying in the air, the battery drum pack is opened, the buckle battery is disconnected and the power is cut off, resulting in a crash, 4. It is recommended to check the battery for bulging after each flight. It is not recommended to continue using the bulged battery.

Description:

Material: Plastic Applicable models: for Mavic 2 Color: Black Net weight: 30g Packing list: 1pcs Drone battery protective buckle Note: Does not include Drone

Camera Bracket Feature:

1. Made of superior material, durable to use 2. Safe and reliable with the lower screw fixing bracket 3. Fixing method for upper installation, convenient for taking off and landing 4. Supports all panoramic cameras with a 1/4 nut hole on the tripod and a sports camera

Description:

Material: plastic Applicable models: for Mavic 2 Color: Black Packing list: 1pcs Bracket Note: Does not include the drone and Insta360 One X and other necessories

Modified Bracket Feature:

1. 1. This MAVIC 2 handheld gimbal conversion kit is formed by 3D printing technology, 2. The plastic material is covered with a sponge to prevent abrasion at the part in contact with the body, 3. Reserve a 1/4 tripod connector at the bottom, which can be transferred to a tripod.

Description:

Material: plastic Applicable models: for Mavic 2 Color: Black Net weight: 100g Packing list: 1set Hand-held modified bracket Note: Does not include Drone, mobile phone and remote control

Flight LED Lights Feature:

1. The night light bracket is light in weight and basically does not affect flight; 2. The height and angle of night light can be adjusted freely, and the angle of aerial photography is larger; 3. With a sponge, it effectively protects the drone and is easy to install; 4. The flashlight adopts imported high-quality three-core high-brightness LED as the light-emitting element, which has a longer service life and higher brightness; 5. The flashlight has no battery, so you need to purchase AA batteries, which is convenient and energy-saving.

Description:

Material: plastic Applicable models: for Mavic 2 Color: Black Net weight: 70g Packing list: 1set Night Flight LED Lights Note: Does not include Drone

Handheld Stand Feature:

1. Made of high-quality materials, durable, 2. The bracket has a sponge pad to prevent the machine from scratching, 3. Convenient take-off and landing, suitable for use in places with uneven ground and inconvenient take-off and landing.

Description:

Material: Plastic, Applicable models: for Mavic 2, Color: Black, Net weight: 30g, Packing list: 1pcs Handheld stand. Note: Does not include the Drone