2M 4M Laser Ranging Sensor RS232 RS485 Modbus RTU PLC | IoT Accessories

2M 4M Laser Ranging Sensor RS232 RS485 Modbus RTU PLC | IoT Accessories

Modbus laser-ranging-sensor is a non-contact ranging product, which can be used for the measurement of various liquid levels and solid particle levels, as well as for the avoidance of obstacles by AGVs and robots. The probe is completely waterproof and can be applied to out door environment with strong anti-interference ability and high accuracy, it can be used for precise non-contact positioning, using Modbus-RTU protocol, and connecting with various PLC and configuration software.

software suite

factory default protocol parameters:

the laser head characteristics

MODBUS Protocol command, detailed explanation, example

note: If not specified, the data in all the following commands is 16decimal, and the slave address is the default 01.

Register Address table:

register Address

(16bit/word)

read/write characteristics

MODBUS address

stored content

00H

read

40001

first distance value

caution,:Do not connect the power supply voltage to other terminals except the power supply, otherwise the module will be burnt.

Read data from the code:

read the first distance measurement data:

transmission: 01 03 00 00 00 02 C4 0B

returns: 01 03 04 00 00 00 00 FA 33

set station number (Function Code: 16 h)

for example, if the initial station number is 01, set the station number to 02.

Host: 01 16 00 00 00 02 C9 C8 (00 02 indicating that the setting of the station number)

slave return: 02 16 00 00 00 FF 08 7A (indicates that the setting is completed and the station number takes effect immediately)

for example, if the initial station number is 01, set the station number to 03.

Host: 01 16 00 00 00 03 08 08(00 03 indicates that the settings of the station number)

slave return: 03 16 00 00 00 FF 09 AB (indicates that the setting is completed and the station number takes effect immediately)

for example, if the initial station number is 03, set the station number to 04.

Host: 03 16 00 00 00 04 48 28(00 04 indicating that the setting of the station number)

slave return: 04 16 00 00 00 FF 08 1C (indicates that the setting is completed and the station number takes effect immediately)