MPPT 30A 40A 50A Solar Charge Controller 12V 24V 48V Auto PV Power Regulator for Lead-acid Ternary Lithium Battery PC Wifi | Обустройство

MPPT 30A 40A 50A Solar Charge Controller 12V 24V 48V Auto PV Power Regulator for Lead-acid Ternary Lithium Battery PC Wifi | Обустройство

MPPT Solar Charge Controller 30A 40A 50A 12V 24V 48V Auto PV Solar Power Regulator for Lead-acid Ternary Lithium Battery PC Wifi

>>Overview                                                                                

This new product based on multi-phase synchronous rectification technology, adopts advanced high-speed processor and MPPT control algorithm, featuring high response speed, high reliability and high conversion efficiency, support WIFI module and GPRS module, and can be applied to communication base stations, households use systems, street lighting systems and field monitoring.

>>Connection                                                                               

1.The monitoring background supports the PC host computer, supports the WIFI module and the GPRS module to expand the APP cloud monitoring (optional).

2.The controller defaults to lead-acid batteries. If you need to connect the other types of batteries, you need to set the corresponding battery type and series number.

>>Features                                                                                  

1. Advanced multi-phase synchronous rectification technology also has high conversion efficiency in low power charging environment.

2. Has an ultra-wide PV array operating voltage range.

3. Advanced MPPT maximum power point tracking technology, the tracking efficiency is not less than 99.5%, compared with the ordinary PWM algorithm, the efficiency is increased by 15 to 20%.

4. Using high-quality imported components and advanced power conversion circuit, the maximum conversion efficiency can reach over 98%, the full load efficiency can reach 97%, and a variety of tracking algorithms can be combined to quickly track the maximum power point.

5. Three-stage charging method: MPPT-lifting charging-floating.

6. 12V/24V/48V battery system automatic identification function.

7. RS485 communication can provide communication protocol to facilitate unified management and secondary development for customers.

8. The controller running parameters can be viewed and set through the PC host computer and mobile phone APP. For details, refer to the host computer and APP manual (optional).

9. With battery temperature compensation.

10. It has comprehensive protection functions such as overcharge, over discharge, over temperature, overload, reverse connection and so on.

>>Protection                                                                                 

Protection funtion

instruction

PV over voltage protection

When the PV array charging voltage exceeds the controller's rated input voltage range, charging will stop.

Battery polarity reverse connection

When the polarity of the battery is reversed, the controller will not work and will not be damaged. After correcting the wiring error, re-open the opportunity to continue normal operation.

Battery over discharge protection

When the battery voltage is lower than the set undervoltage value, the discharge of the battery will be automatically stopped to prevent the battery from being over-discharged and damaged.

Battery overload protection

When the controller output current is greater than the set value, the load output will be automatically stopped to prevent the battery from being over-discharged and damaged.

Battery over volatge protection

When the battery voltage reaches the overvoltage protection setting value, the battery will be automatically stopped to prevent the battery from being overcharged and damaged.

Night anti-reverse protection

At night, since the battery voltage is greater than the voltage of the photovoltaic module, the automatic protection prevents the battery voltage from being discharged through the photovoltaic module;

Equipment overheat protection

The controller has its own temperature sensor. When the temperature is higher than the set value, the charging will stop. When the temperature is lowered, it will automatically start to work.

High voltage surge

This controller can only protect high-voltage surges with low energy. In areas with frequent lightning, it is recommended to install an external lightning arrester.

>>Characteristics:                                                                    

NO.

Name

Function

Instruction

1

PV+

Photovoltaic array positive electrode

PV array input

2

PV-

Photovoltaic array negative

3

BAT+

Battery positive

Battery pack terminal

4

BAT-

Battery negative

5

LOAD+

DC load positive

DC load output (JN-MPPT-CL does not have this output)

6

LOAD-

DC load negative

7

Temp sensor

External temperature test terminal

Measuring battery temperature

8

RS485

Communication port

Realize the monitoring of host computer, WIFI and GPRS communication

>>Specification：                                                                     

parameter name

Parameter value (and adjustable range)

MODEL

MPPT-AL

Current rating (A)

30

40

50

Maximum charging current (A)

30

40

50

PV maximum input power (12V) (W)

400

500

600

PV maximum input power (24V) (W)

800

1000

1200

PV maximum input power (48V) (W)

1600

2000

2400

PV maximum input power (96V) (W)

--

--

--

Output maximum current A

15

20

25

System identification voltage range v

12V battery system

DC9V-DC16V

24V battery system

DC18V-DC32V

48V battery system

DC42V-DC60V

96V battery system

96V is a stand-alone system

PV panel open circuit input voltage range v

20V～100V(12V battery  system)

40V～145V(24V battery system)

80V～145V(48V battery system)

c

MPPT efficiency

﹥99.5%

Conversion efficiency

﹥98%

Operating mode

The default is the household mode 24H

>>Product Show