1pieces T12 Heater Handle For Modification Hakko Soldering Station Iron Thermostat Electric DC DIY | Инструменты

1pieces T12 Heater Handle For Modification Hakko Soldering Station Iron Thermostat Electric DC DIY | Инструменты

Product parameters

Input voltage: 12~24V DC, optimal voltage: 20~24V Input interface: 5.5/2.1mm standard DC interface, inside and outside negative Temperature adjustment range: 200 to 400 degrees (the temperature is different due to the shape of the T12 head). Power: 72W (24V, 3A DC power supply measured) Handle length: 135mm Handle outer diameter: 16mm Sheath outer diameter: 21mm The material of the handle is PC tube (scientific name: polycarbonate tube), and the performance and temperature resistance index of the material is far greater than acrylic. The handle head is made of aluminum alloy and matt plated. The key component in the handle is that the connector with the T12 head uses the same structure as the 912 handle, the connection is very tight, non-manual DIY comparable. The key component op amps in the board use the industrial-grade imported LM258 to make the circuit more stable. MOS adopts a new imported TPC8107. Since the internal resistance of the MOS is very small, it can effectively reduce the heat generated by the MOS when the circuit is working.

Note: The power of T12 is determined by the input voltage. As long as the current reaches the minimum requirement, for example, the output is 16V. Even if the output current is 4. 5A, the T12 can only reach a maximum of 32W. The actual effect is 16V, 2A. The power supply is the same