Tiny6410 core board 256M RAM+1G SLC Nand 11 S3C6410 |

Development board introduction Tiny 6410 is an embedded core board with ARM11 chip (Samsung S3C6410) as the main processor. The CPU is based on ARM1176JZF-S core design. It integrates powerful multimedia processing unit, supports hardware encoding and decoding of video files in Mpeg4, H.264/H.263 formats, and can be output to LCD and TV display at the same time. It also has 3D graphics hardware. Part Accelerator to achieve OpenGL ES 1.1-2.0 accelerated rendering, it also supports the smooth scaling of 2D graphics images, flip operations. Tiny 6410 is a high-density six-layer board design with a size of 64 x 50mm. It integrates 256M DDR RAM, 256M/2GB Nand Flash memory, uses 5V power supply, realizes various core voltage transformations necessary for CPU on board, and also has a professional reset chip. Through a 2.0mm spacing array of pins, it leads to a variety of common interface resources for unwanted use. Line design CPU board developers to quickly develop two times to use. Tiny 6410 SDK is a reference design backplane using Tiny 6410 core board. It mainly helps developers verify the function of the core board and extend the development. The backplane has three LCD interfaces, four-wire resistor touch screen interface, 100M standard network interface, standard DB9 five-wire serial port, MiniUSB 2.0 interface, USB Host 1.1, 3.5mm audio input and output port, standard TV-OUT interface, SD card, infrared reception and other common interfaces; in addition, four TTL serial ports are introduced, another one TV-OUT, SDIO2 interface (can be connected). SD WiFi interface; also on the board buzzer, I2C-EEPROM, backup batteries, AD adjustable resistance, eight interrupt buttons, etc. In the layout arrangement, we try to consider the common size of LCD modules can be fixed on the floor, such as 3.5 "LCD, 4.3" LCD, 7 "LCD, etc., so that users do not mix all kinds of wires in use, but also increase the portability of the development kit. We've also made full use of 6410's ability to support SD card startup. With our carefully developed Superboot, you can easily and quickly install various embedded systems on the development board (Windows CE6/Lin) by copying the target files into the SD card (which can support up to 32G high-speed and large-capacity cards). Ux/Android/Ubuntu/uCos2, etc.), even without burning, you can run them directly on SD card.   S3C6410A, ARM1176JZF-S core, main frequency 533MHz, highest 667Mhz DDR RAM memory 256M Mobile DDR RAM, 32bit data bus FLASH storage Standard 1GB SLC NAND Flash Interface resources 2 x 60 pin 2.0mm space DIP connector 2 x 30 pin 2.0mm space DIP connector On board resources 4 x User Leds (Green) 10 pin 2.0mm space Jtag connector Reset button on board Supply Voltage from 4.75V to 5.25V PCB size The 6 Tier high density PCB is produced by sunk gold technology. 64 x 50 x 12 (mm) Operating system support Superboot-6410 Linux2.6.38 + Qtopia-2.2.0 + QtE-4.8.5 WindowsCE.NET 6 Android 2.3.4 Ubuntu-0910 Detailed 6410 bare machine tutorial UCos2-6410

 

---