315Mhz RF Remote Control Copy code 4 channel Electric cloning duplicator 315mhz Key Fob learning garage door controller | Электроника

4914954415354537

18650 Rechargeable battery 1PCS 5000M Mobile charging battery Micro USB 18650 3.7V 3500mAh Li-ion Rechargeable Battery 4 LED Indicator Power bank US $ 5.00 /piece 8PCS Liter energy battery USB 5000ML Li-ion Rechargebale battery USB 18650 3500mAh 3.7V Li-ion battery + USB wireUS $ 37.99 /piece Liter energy battery RCR 123 16340 780mAh 3.7V Li-ion Rechargeable Battery + Travel Charger Can be used to LED FlashlightUS $ 5.49 /piece Liter energy battery 3.7V 1800mAh 16650 Rechargeable Li-ion battery + Travel Charger Can be used to LED FlashlightUS $ 5.49 /piece Liter energy battery li-ion Rechargeable Battery 14430 3.7V 650mAh li-ion battery + Travel Charger Can be used to LED FlashlightUS $ 5.20 /piece Liter energy battery ICR 18350 lithium battery 1200mAh 3.7V rechargeable battery + Travel Charger Can be used to LED FlashlightUS $ 5.49 /piece Liter energy battery 5PCS 100% original 18650 3400mAh battery NOR18650B 3.7 V lithium-ion Rechargebale batteryUS $ 20.99 /piece 18650 1PCS-6PCS 3500MAH 3.7V 4.8A 18650 Rechargeable battery use battery core for FlashlightUS $ 3.99 /piece

315Mhz RF Remote Control Copy code 4 channel Remote Electric cloning duplicator 433 mhz Key Fob learning garage door Light Switch control

 

Duplicate Your Existing Remote Controllers, such as Vehicle central locking systems, Garage doors, Electronic gates, Electrical appliances, Car sunroofs, Heating systems, Light Switch,etc.

 

Please confirm two things (1. Frequency/2. Chip code(Encoder IC)before you buy it. It\\\'s very very important. Don\\\'t ingnore them. Don\\\'t simple think the frequeny is same then it can be copied. It\\\'s not true.   With this remote cloner you can clone all 315MHz fixed code key fobs. Some remotes that use this frequency are listed below. This is not a complete list! If your remote uses the 315MHz  frequency it will work with the remote duplicator (note: rolling code remotes will not work)       Compatibility is the most widely MCU code, can copy commercial PT2262 PT2264 PT2260, PT2240, PT1527,SC2262, SC2260, EV1527, SCT527, HS1527, HS2240, SCL1527, FP1527 HS2262 HS2260 LX2262 LX2260 EV1527 encoding chip. Such as the sound table frequency stabilization, can copy the commonly used electric door, gate, fixed code, learning code, wireless remote control, the operation is simple, practical and convenient.   If you fail in copying with proper operation, you might have to check whether your device has a chip above.

 

 

Specifications:

Operating frequency: 315MHz Power by 27A 12V battery Weight:23g Size: 55mm x 28mm x 14mm Distance: Up to 50 meters   Package included:   1 x RF 315Mhz Remote Control (Do not include the battery)   Note : This items send out without retail Package ,but we will pack it well before shipped out.   Instructions       Step1 – delete the existing code of our remote duplicator   1) Press and Hold “A” and “B” buttons together - Led will flash 3 times 2) Keep holding “A” button and release “B” button 3) Keep holding “A” button and push “B” button 3 times, Led will start flashing Non-stop (Please note: during the deletion procedure, make sure to keep the “A” button pressed the whole time) Now press any key on the remote control, LED lights are not bright, so delete code success; if you press the button LED lamp is lit, indicating that the original code is not deleted !   Step2 - clone your original remote   1) Put both remotes into "back to back" position. Make sure they have direct contact. Or the two remote controls should be placed as closely as possible (put the two remote controls on the desktop side by side with zero distance) 2) Press and hold one button on remote duplicator then press one button on your original remote   Keep holding until LED on remote duplicator is Flashing , you have successfully cloned. ( other buttons follow the same above operation)   For the presence of noise, it should avoid interference to operate, If the copy is not successful, it should recopy after clearing code