Wireless Satellete Sport Tracker Car Postioiner GSM/GPRS 4 Band Frequency Locator Postioning Device With 2G Sim Card Pet Finder |

 Wireless Car Postioiner GSM/GPRS Satellete Sport Tracker 4 Band Frequency Locator Postioning Device With 2G Sim Card   Brief Introduction The product is based on GSM/GPRS network and GPS satellite positioning system, conducts positioning and monitoring on the remote target through  SMS or Internet, is GPS and AGPS dual-mode positioning with the most advanced technology, has built-in large capacity battery, super-long standby,  free installation, strong magnetic adsorption portable GPS locator.    Category Parameter Function Description Weight 150g Positioning GPS+LBS Dimension of complete machine 87X26X54(H)mm Call function voice monitoring Packaging dimension 12.60*80*50mm Wrist off alarm When falls off the car, it gives the alarm to APP client.  color black Safety fence Support key Power Key Historical trace View 90 days' historical traces 　 　 Low battery alarm  When electric quantity is lower than 10%, it will give alarm to APP client.  GSM MT6261 Remote power-off  APP client can power off the watch remotely.  GPS MT3337 APP support system Android version 2.3 and above, Apple version 5.0 and above Number of GPS channels 20 channels System language  Polish, Vietnamese, Turkish, Arabic, Norwegian, German, French, Spanish, Portuguese, Italian, Russian, Chinese and English GPS sensitivity （-159DB） Software upgrade Remote wireless upgrade  GPS accuracy 5-15M System map   Google, Baidu, AutoNavi, Tencent, OpenStreetMap Operating temperature （-20--60℃） Smart sleep mode Shake the device to activate the work GPS antenna High sensitivity active ceramic antenna Deep Sleep mode The telephone call device activates the work GSM antenna Large area FPC gold-plated antenna Timing switch machine activates device, only work 3 minutes Battery Gel polymer 6000mA  　 　 GSM frequency 850/900/1800/1900 　 　 magnet N52 6 pieces (strong magnetic) 　 　 Charging interface USB 　 　 waterproof level IP67 　 　 Smart sleep mode Standby time is about 180 day 　 　 Deep Sleep mode Standby time is about 800day 　 　 Timing switch machine Standby time is about 1095day 　 　 Paint of watch case UVA wear-resistant metallic paint 　 　 Packaging size 43x43x19(H)CM 　  　      Technical Parameters  ●GSM frequency band: 850/900/1800/1900MHz ●Working voltage: 3.9V DC ●Working current: ≈35mA ●Sleep current: ≈4mA ●Timing power-on mode, sleep current≈0.2mA  ●GPS positioning time: cold restart ≈38s (Open sky) warm restart ≈32s (Open sky) hot restart ≈2s (Open sky)                                      ●GPS positioning precision: 10m (2D RM) ●Ambient operating temperature: -20℃～+60℃ ●Ambient operating humidity: 20%～80%RH ●mm Dimension: 87(L)×54(W)×26(H)mm   SIM Card Installation and Device Power-on   3.1 Requirements for SIM Card Selection  ●Please use 2G-GSM network SIM card .                                ●Terminal SIM card should activate caller ID.  ●Terminal SIM card should activate GPRS function.                            ●PIN code of terminal SIM card is in the off state.  3.2 SIM Card Installation  ●As per small icon of SIM card, hold SIM card by hand, the chip side is downward and the end with gap is inwards; push the card into the card slot and hear “click”. When the card should be taken out, press the top end of SIM card which is exposed outside the card slot with fingers, and then pop up.  3.3 Device Power-on ●When the device is inserted into the SIM card, the tamper switch should be in the pop-up state, and the blue light flashes to indicate that the device is powered on. Blue light flashing regularly, then the device GPS is working properly.   4、Instruction of Indicator Light   4.1 Blue LED (working state indicator light) ● When the device is working ,The LED flashes. ●Blue work indicator in the equipment work three  minutes after the automatic extinguishing, a  telephone come in or restart the device, the lights  work again after three minutes and then  automatically turn off. 4.2 Red LED (charging state indicator light) ●The LED is not lit in normal times; the LED is  always lit during charging; after being fully charged,  the LED turns green.    FAQ ●When the device is not online and not located, please set up APN parameters of SIM card of the device to make the device work normally. Because different SIM card communication operators in different countries have different APNs, in order to know APN of your SIM card, please consult with local communication operators.      Please edit “apn, network name” using master control number mobile phone, send to SIM card number of the device.      Example: apn,cmwap# In the example, cmwap stands for APN of China  Mobile operators.      If sets up APN successfully, reply the message  “set up APN successfully”.  ●When the mobile phone dials the device, it prompts “The user you dialed is busy now”, it indicates that SIM card of the device can’t identify the number when caller ID is not activated, please activate caller ID for SIM card of the device.  ●After setting up the instruction on APP, it always shows sending or failed, the reasons are as follows:  ①　The place where GPRS network of the device is located doesn't have signal or signal is not good, can't transmit GPRS data.  ②　SIM card of the device doesn't activate GPRS function, it is suggested that you should activate 30M data monthly plan.  ③　The device is on a call, GPRS data transmission is automatically turned off.  ④　When the device is in the sleep state, it should dial SIM card number of the device to activate the device operation.  ●The device of APP is always off-line.  ①　SIM card balance of the device is insufficient, can’t transmit data and dial a call.  ②　The device is not power on or power cut.  ③　The device is in the place where there is no signal or signal is very poor (mainly consider that the device data can't be uploaded to the server).