48V 2A 13S bike modification/electric/scooter lithium battery charger 36V 10S Polymer +Free shipping | Электроника

This charger output: 42.0 VDC 2.0A DC charger which is suitable for 36 12-14AH lithium-ion battery charging capacity. We also have a wide variety of safety features, such as voltage, over-current, over heat, short-circuit protection, reverse connection. 2 electrical parameters project parameter explain Input voltage and frequency AC180V ~ AC260V Frequency: 50Hz, 60Hz Input current <1.0A Test conditions: Minimum input voltage, full output load Input Protection 250 V 3.0A safe In case of damage to the safety tube failure efficiency More than 85% Test conditions: Input voltage and full load output No-load output voltage 41.50 + 0.5 V No battery and no other type of charge Average output current (Heng Yuan Lu) 2.0A + prefix = st1 ns = "urn: schema, Microsoft-com: office: SmartTags" 0.15A (39) Ambient temperature 250C. Conversion (current) 0.30 + 0.1A Limiting voltage (constant pressure) 42.00 B + 0.5 V Chargers to maintain the voltage (Chong Fu) 41.50 B + 0.5 V 3 Cooling mode The fan draws air and is formed. 4 The charging process and the status LED Charger battery charger to determine normal DC current phase access, for red LED lights. Standby mode, full of LED lights for green. 5 short circuit protection Will be able to enter the state protection at the output end of a short circuit, and automatically resume normal after a fault. 6 room temperature Operating temperature + 40 C-100C. Operating Humidity: 15% -90% Storage temperature + 70 C-200C. 7 Life This charger in environment of temperature 250C, the normal use of> 10,000 thousand hours. 8 mechanical appearance 8.1 Size: 165x73 x width 45mm = high <font color = "font-family: _ GB2312" 8.2 Weight (kg): 0.54 kg 8.3AC line: English 1.05 m 8.4 lines: DC 2.1 * 5.5 Round 1.1 m Prefix = O NS = "urn: schema-Microsoft-com: office:" Time Stress Test Mode first step: Test mode without load Current Voltage 53.9 V / 0.5 The second step: Test mode DC 1.9A / 0.1 The third step: 3A / the current mode Fourth step: Test transformation is the current mode of 0.3A / 0.1 ====================================================================== =================== Fifth step: Short circuit test advice: No-load charger voltage 53.9 + 0.5 V (relay without thermal conductivity, the requirement of more than 0.4A current when the relay, then charge up to 54.6 + 0.5 V). This charger output: 54.6 VDC 2.0A DC charger which is suitable for 48v 12-14AH battery capacity lithium-ion battery charge. We also have a wide variety of safety features, such as voltage, over-current, over heat, short-circuit protection, reverse connection. 2 electrical parameters project parameter explain Input voltage and frequency AC180V ~ AC260V Frequency: 50Hz, 60Hz Input current <1.0A Test conditions: Minimum input voltage, full output load Input Protection 250 V 3.0A safe In case of damage to the safety tube failure efficiency More than 85% Test conditions: Input voltage and full load output No-load output voltage 41.50 + 0.5 V No battery and no other type of charge Average output current (Heng Yuan Lu) 2.0A + prefix = st1 ns = "urn: schema, Microsoft-com: office: SmartTags" 0.15A (39) Ambient temperature 250C. Conversion (current) 0.30 + 0.1A Limiting voltage (constant pressure) 42.00 B + 0.5 V Chargers to maintain the voltage (Chong Fu) 41.50 B + 0.5 V 3 Cooling mode The fan draws air and is formed. 4 The charging process and the status LED Charger battery charger to determine normal DC current phase access, for red LED lights. Standby mode, full of LED lights for green. 5 short circuit protection Will be able to enter the state protection at the output end of a short circuit, and automatically resume normal after a fault. 6 room temperature Operating temperature + 40 C-100C. Operating Humidity: 15% -90% Storage temperature + 70 C-200C. 7 Life This charger in environment of temperature 250C, the normal use of> 10,000 thousand hours. 8 mechanical appearance 8.1 Size: 165x73 x width 45mm = high <font color = "font-family: _ GB2312" 8.2 Weight (kg): 0.54 kg 8.3AC line: English 1.05 m 8.4 lines: DC 2.1 * 5.5 Round 1.1 m Prefix = O NS = "urn: schema-Microsoft-com: office:" Time Stress Test Mode first step: Test mode without load Current Voltage 53.9 V / 0.5 The second step: Test mode DC 1.9A / 0.1 The third step: 3A / the current mode Fourth step: Test transformation is the current mode of 0.3A / 0.1 ====================================================================== =================== Fifth step: Short circuit test advice: No-load 54.6 + 0.5 V charger voltage (relay without thermal conductivity, the requirement of more than 0.4A current when rel