EV1527 Learning code remote control & 433M RF Wireless Delay Decoding module for Smart Home PLC Relay Switch | Обустройство дома

EV1527 Learning code remote control & 433M RF Wireless Delay Decoding module for Smart Home PLC Relay Switch | Обустройство дома

Note: Adjustable resistors (potentiometers) are components that are easily damaged. Use a suitable screwdriver to slowly rotate. Click here to buy a screwdriver.

Receiver parameters:

Model No.: RF11A04 OR CE-RF11A-045V

As this product(click here), you can directly insert  Arduiuo UNO MEGA2560 DUE 

Learning method and steps:

In normal operation mode, LED (D1) will be lit, when receiving a valid remote control (EV1527 / PT2262) key value, LED will flash.

Clean code: hold the button to press.LED offs, keep pressing about 8 seconds until LED lights. At that time, clean code completion (Note: After the implementation of clean code, previous remote controls do not exist.

Adaptation (learning):

Step 1 (into the learning mode):trigger the key button, LED offs;

Step 2 (adapter channel 1): press the first button of remote control and then, LED offs after flashes for four times. This time means that it had learned the value of the first button

Step 3 (Adaptation Channel 2): Press the second remote control, LED offs after flashes 4 times, This time means that it had learned the value of the second button

Step 4 (adapter Channel 3): Then press the remote's third button, LED offs after flashes 4 times, This time means that it had learned the value of the third button

Step 5 (Adaptation Channel 4): Then press the remote control's fourth button, LED lights after flashes 4 times, This time means that it had learned the value of the fourth button.

NOTE: The process must be completed within 15 seconds

Use more details, pleaseclick here!