EU DUTY FREE Ebike Kits Front or Rear Wheel Electric Bicycle Conversion Kit 36V 48V 250W Brushless Gearless Motor LCD Display | Спорт и

EU DUTY FREE Ebike Kits Front or Rear Wheel Electric Bicycle Conversion Kit 36V 48V 250W Brushless Gearless Motor LCD Display | Спорт и

RisunMotor 36V/48V 250W eBike Kit Front or Rear Wheel Conversion Kits 12"-700C

Warranty

Installation Guide: 

1) Unscrew the existing front or rear wheel screws, remove wheel;
2) Install the motorized wheel and fasten screws;
3) Attach LCD, Brake lever and throttle;
4) Put Controller at suitable position and connect all wires.
5) Turn on battery, throttle key and LCD, set correct value from LCD
Correct wheel size setting: according to your wheel size
Correct max speed setting: set it at max value 72
Correct P1-P5 setting: P1=46,P2=0,P3=0,P4=0,P5=12

Installation Guidance:

1) Uncrew the existing front or rear wheel screws, remove wheel;
2) Install the motorzied wheel and fasten screws;
3) Attach LCD, Brake lever and throttle;
4) Put Controller at suitable position and connect all wires.
5) Turn on battery, throttle key and LCD, set correct value from LCD
Correct wheel size setting: according to your wheel size
Correct max speed setting: set it at max value 72
Correct P1-P5 setting: P1=46,P2=0,P3=0,P4=0,P5=12

FAQ:

1) Does your front or rear wheel support disc brake?
Yes, our motor wheel support standard 6-hole type disc brake
 

2) Why can't turn on power
Please kindly check whether battery poles connect with controller is correct;
Please kindly check whether all connection correct and tight
Please kindly check whether you connect electric lock plug and turn on throttle key
Please kindly check whether you turn on LCD Display

3) Why after I turn on power and turn throttle, motor doesn't work
Please kindly check whether all power already turned on
Please kindly check whether throttle connection is correct (Throttle is red/black/blue wires)
Please kindly check PAS speed level on LCD, whether it is not 0 (0 will turn off PAS and throttle)

4) Why my speed display is not correct
Pleasekindly check whether you have correct setting:
Correct wheel size setting: according to your wheel size
Correct max speed setting: set it at max value 72
Correct P1-P5 setting: P1=46,P2=0,P3=0,P4=0,P5=12

5) How can I disable cruise function
Please turn on power
Please remove cruise plug (small black plug of Black/Blue wires)
Turn off power
Turn on power again

6) Why after turn on, LCD show "03 Info"
This is because of hall sensor abnormal, and most time is because hall sensor connection doesn't contact well, please kindly check the 5-wire hall sensor connector and also inside whether any pin bent doesn't contact well.

7) What is the difference between front wheel and rear wheel?

​