Injection Packer Grouting for Concrete Leakage 7.5 inch STANCH PACKER 100pcs Efficient Building crack repair | Обустройство дома

Injection Packer Grouting for Concrete Leakage 7.5 inch STANCH PACKER 100pcs Efficient Building crack repair | Обустройство дома

For combined shipping with Adoration_Inc pumps or other accessories, Pls order "buy" then in Aliexpress,  but don't effect "payment"  ,  ask us for discount and freight cost cut NOW!!! We are the factory direct supply worldwide.

1/2"(13mm) X7.5"   (195mm)

Contact Person:Eric Chew   Whatsapp:+86 13983390012 Skype:godblessjoyee   
www.adoration-tech.com

WE ARE THE PRODUCT FACTORY focus on customer experience improvment !!!

Injection method statement

1.Identify the crack.

2.Drill the hole 5 to 10 cm away from the crack at 45 toward the crack.

3.Clean the hole properly.

4.Insert the packer.

5.Fix and tight the packer.

6.Connect the pump to the packer and start injecting.

7.After injection material is totally dry remove the packer.

PREFECT PRODUCTS GET GOOD FEEDBACK :

You cameto theRIGHT SOURCE,we are known in the industry for our packer variety and very competitive prices.

You have decided on the grout and got the right pump.Now you move on to step three: Which packers or ports will you

use for your injection job? Packers come in many sizes andshapes. Prices range from cents to dollars. But how do you

decide? Is more expensive always better - is plastic aseffective as metal and rubber?

Well, it all depends. The injection method and theselected material will help you to determine the hardware. Are

your cracks actively leaking, are they dry, do you use epoxy ordo you inject polyurethane? How much pressure will be used,

how do you connect your grout line?There are two primary categories of packers available.

Insertable packers (mechanical packers) and surface mountedports.

Mechanical packers are typically used for polyurethane injectionand high pressure epoxy injection. Since they are not glued to

the surface, they work well in wet areas and with decayed'problem' concrete.

Mechanical packers come with zerk fittings and button heads (slide fittings). The zerk type is more commonly

used and is less costly. It easily connects and disconnects and works nicely with medium to high injection pressures. The

button head type can be of advantage in high volume applications and it offers a superior connection which is

helpful for single operator injection and large applications. Injection pressure is the keyword. To determine a

quality packer it must withstand high injection pressures without leaking and moving out of it's drill hole. A snug fit and

solid connection are mandatory. Nobody likes packers to fail at injection pressures of 1000psi and more. Now, realistically

speaking even the best packer may slightly leak at the connection at extreme pressures. But there is the difference

between a drip and a gush.

OUR ADORATION_INC Premium packers are made of metal and an expandable rubber sleeve to minimize concrete spalls and

packer blow outs. A medium soft, 'made to stick' rubber that evenly expands diameter while compressed provides the best

grip. Mechanical packers made of cheap plastic and a plastic sleeve are at a disadvantage at high pressures, but may

suffice at lower-high volume injections. Always keep in mind, a snug and reliable fit is essential for the safety of the technician

and the key factor for successful injection work.

Return Policy

If you want to exchange the items received, you must contact us within 7 days of the receipt of your order. And you should pay the additional shipping fees incurred and the items returned should be kept in their original status.

Feedback

Since your feedback is very important to our business`s development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thank you.

Terms

If the item is defective, please notify us within 3 days of delivery. 
All items must be returned in their original condition, in order to qualify for a refund or exchange of goods. 
Please contact us before leaving any negative or neutral feedback. We will work with you to solve any problems.