Обои для современных стен перегородка Окленда мост городской вид роспись

Обои для современных стен перегородка Окленда мост городской вид роспись

About our Mural

① The Mural will be divided into 5 parts because it's very long. High-definition and high-resolution original image printing.
② Our wall art mural material is called silk cloth, which is currently the most popular high-end decoration material.
③ Features of the mural: bright color, waterproof, Stain resistant, easy to take care of, durable, at least 10 years.
④ Wall decoration, can be pasted in the living room, bedroom, TV background wall, sofa background wall and art wall everywhere.
⑤ This product is not self-adhesive, it is not a wall paper with "sticker". it need "heavy wallpaper glue" for installation, please purchse construction accessories yourself.
⑥ It is not self-adhesive, but the effect and quality are much better than self-adhesive. don't worry too much about installation, as long as you can paste wallpaper, then you can use wallpaper accessories to paste the mural.

Customized Your Mural

Customized size: Please advise the size you need (width * height)
Customized Picture: Please send us your photo or picture to our email address: alicoco@139.com
Material: Waterproof Silk cloth (Surface smooth and bright, silk texture, durable and washable. (non-adhesive)

Customized Size

The order quantity you need = Area (Width x Height)
order 1 pcs = 1 square meter ( 1㎡)
order 2 pcs = 2 square meters ( 2㎡)
order 3 pcs = 3 square meters ( 3㎡)
......

For example:
The Mural size you need width 180cm * height 110cm
The area = 180cm x 110cm = 19800 c㎡ ≈ 2㎡
So you have to order 2 pcs ( 2㎡)

How to choose the correct specification of the Mural ?

First please measure the actual dimension (width and height) of the wall, and select a Mural that size a little larger than the wall. Please cut off the extra parts after installation.
Then you will get perfect effect that the Mural cover completely on the whole wall.

Correct size of Mural

The size of Mural you selected should be larger than the wall, You can cut off the extra parts after installation. So that the wall will not be exposed.

Wrong choice of Mural size

If the Mural size smaller than the wall, after installation, there will be some exposed parts around the edges. It is not perfect.

Installation Method for Mural

Installation Method for Mural

【1】What do you need for installation?
Tape measure; Foam paint roller; Scraper; Brush; Craft knife; Damp cloth and Heavy duty paste.
【2】Wall cleaning.
Fill in all cracks or holes, polished wall with fine sandpaper and use a sponge to clean dust, dirt or grease on the wall.
【3】Floor cleaning.
Clean up the rubbish on the floor to keep the floor neat and dry.
【4】Creat a plumb line.
Use a tape measure or spirit level to markthe vertical line on the wall from left to right.
【5】Apply the paste on the wall.
Use a brush to apply the heavy duty paste to the first part. please Note: the paste on the wall should not be too thick, every part must be painted in place.
【6】Use a scraper.
Use a scraper to install the first mural from top to bottom by vertical line and smooth out any air bubbles from the middle to both sides.
if the wallpaper height or width is greater than the wall, please use a craft knife to cut off the excess part.
The scraper can be covered with a sock to avoid being too sharp and scratching the surface of the mural.
Note: Many corners may be notstraight. You can reserve 1 inchMural on the left when installing the first panel. cut off the excess parts after you finish it.
【7】Install the next mural
Match out the subsequent parts by sliding into place and use a scraper to smooth out air bubbles.
【8】Upgraded stitching - No overlapping (Repeat step 6)
No overlapping, just match the edge of the previous part directly according to the pattern. Until perfect seamless stitching.
【9】Follow 5-8 step by step to complete the assembly.
Warm Prompt: When you install near the power switch, you can cut the diagonal of the power switch similar to " X ", and then cut off the excess part along the edge.
【10】Finish to the last part and remove any excess part and paste. that's it.