Vilaxh 62xl Refillable Ink Cartridge Replacement For HP 62 Xl Envy 5540 5640 7640 5646 5541 5740 5742 5745 200 250 Printer | Компьютеры и

Vilaxh 62xl Refillable Ink Cartridge Replacement For HP 62 Xl Envy 5540 5640 7640 5646 5541 5740 5742 5745 200 250 Printer | Компьютеры и

Note

Order Ink Cartridge must first check your original  cartridge model,

If your original ink cartridge is NOT 62 (or 62XL),Don't Buy this cartridge.

If you do not know，please contact us for advice!

Package Include:

 BK Package Content:    

1PCS x  Black REFILL Ink Cartridge 

C Package Content:

1PCS x Tri-color REFILL Ink Cartridge 

1SET Package Content:

1PCS x  Tri-color Ink Cartridge 

1PCS x   Black Ink Cartridge 

Cartridge ink Package Content:

1PCS x  Tri-color Ink Cartridge 

1PCS x  Black Ink Cartridge 

30ml x black ink

30ml x cyan ink

30ml x yellow ink

30ml x Magenta ink

1set x Absorbent clip 

Printer Model:

For HP Envy 5540 5640 7640 5646 5546 5541 5542 5543 5544 5545 5547
5548 5642 5644 Printer
For HP Officejet 5740 5741 5742 5743 5745 200 250 5744 5746 Printer

Q&A

1）the printer shows "NO ENOUGH INK" or "EMPTY" or theIndicator light “BLINKING”

It’s not quality Problem.

This is VERY COMMON with remanufactured cartridges as the ink gauge cannot be reset.

To resume printing, click "Ok" or "Continue" through any prompts.

If your printer has an LCD screen, press "Ok" on it.

2）Error Message “Not Recognized” Cartridge Damaged"... ...

For this situation, usually has two reasons:

1.Not install well

2. ink cartridge chip dirty

Solution:

1. remove the problem cartridge from its cradle inside the printer, and double check the copper strip is intact.
2, take a PENCIL ERASER, and firmly eraser over the contacts,
3  Re-install the cartridge into the printer.

If the problem persists, reset your printer by:

1. Turn off computer AND printer with cartridges installed

2. Unplug printer and leave everything off for 2 minutes

3. Restart printer AND computer and attempt to print again.

3） POOR PRINT QUALITY

Example in picture:

please run a cleaning cycle. Once one cycle completes, your printer will print a test page. 

If you are NOT satisfied,

please follow these to make sure the printhead nozzles are not clogged with dry ink:

1. Take a lint free towel (i.e. coffee filter) and fold it in half.

2. Remove the cartridge from the printer, locate the printhead (on the bottom side of the cartridge),  hold the cartridge with printhead facing downward and press it to the coffee filter for 3 seconds.

3. Lift the cartridge up - you should see an ink blot on the coffee filter.