Electric Drill Pump Self Priming Transfer Pumps Oil Self-Priming Hand Round Shank Portable Heavy Duty Fluid Water |

Electric Drill Pump Self Priming Transfer Pumps Oil Self-Priming Hand Round Shank Portable Heavy Duty Fluid Water |

Product Description
Product Feature
Exquisite workmanship, small size, anti-corrosion, and wear resistance. Fit all drill chucks, you can get a pump with an electric drill.
Fine quality but inexpensive. High flow, stable performance, and high efficiency.
Easy to install and simple to use, lightweight. No batteries needed. Compact design, convenient to carry and storage.
Ideal for transferring light liquids, such as freshwater, seawater, oil, dilute organic solvents, insecticides, and liquid fertilizers.

How To Use
1. To achieve optimum priming and long service life, apply a few drops of lubricating oil in the pump inlet prior to each use and flush with clean water after each use.
2. Be sure the inlet hose is airtight and as short as possible; inlet hose should not exceed 9FT (2.75m).
3. When pumping abrasive fluids or liquids with solids, using a strainer on the inlet line for longer service time.
4. It is recommended that the pump is mounted to a surface for security and ease of use.
5. Mount and start drill, observe whether the inlet pipe has a certain fluid that is sucked into the pump within 15-20 seconds. If not, check that the inlet tube is properly mounted to the inlet pump. Do not run dry, if the pump fails to prime, check if the hose is kinked or clogged.
6. The recommended speed is 1500-3500 rpm. The pump head and flow are related to the speed. The higher the speed, the higher the head and flow
-1500 rpm, the pump head is about 1.5 meters, the flow is about 15L per minute.
-3000 rpm, the pump head is about 3 meters, and the flow rate is about 30L per minute.
7. Pumping speed is fast, can pump 25-30 L water per minute (depends on the rpm of the drill).

Product Specification
Type Drill Pump
Color Black
Size Approx. 106x37x64mm
Material Plastic
Inner Tube Diameter Approx. 15mm
Transmission Shaft Diameter 8mm Round Shank
Working Temperature Approx. 5-49℃ (41-120℉)

Package Included
1 x Drill Pump
2 x Hose Clamp
2 x Connector

hello, guys, thank you for visiting my store.We guarantee the quality of our products.Have a nice day!