Маска для лица с защитными очками от газов с активным углем, фильтрующим пыль, повторно используемая, стираемая, с защитным щитком.

Маска для лица с защитными очками от газов активным углем фильтрующим пыль повторно используемая стираемая защитным щитком.

Q&A

Q: When to change the filter box?
A: 200 hours of use time. Establish a replacement schedule is a need. After wearing it correctly, it should not smell any harmful smells. If you smell harmful smells, please leave the work area immediately and replace the filter box.

Q: What can be washable?
A: The filter cotton and filter box cannot be washing.The body mask can be washed.
Please note:
1) Do not wipe the mirror surface directly when the external environment is dry
2) Choose lens wiping paper or soft flannel with a small amount of alcohol to wipe gently
3) If scratched or damaged, please replace the lens immediately

Q: Where can mask be used?
A: Sawing Work,Demolition Work,Grinding Work,Renovation Work,production in mining, cement factories, ceramics factories, shipyards, metal smelting, power plants, stone processing, polishing, interior design, sawdust, wood processing, graffiti painting, wall art, powder processing, etc.

Q: Can I wash the mask?
A: The main body of the mask can be cleaned, but the filter box cannot. It is recommended to wipe the goggles with a soft clean damp cloth, do not rinse directly with water, it may cause scratches

Product packaging：

1xFace Mask Gas mask
2xCartridge filters
1xElastic Ribbon
1xInstructions

Activated carbon Filter box

Protect paint, polish, welding and other industrial environmental-pollutants, such as formaldehyde, benzene and homologous gases.

The mask and filter box are universal. Can be matched with 3M mask. If it is matched with other products, please pay attention to the filter box interface of the mask, the diameter of the filter box is 8.5cm

Wear display

Usage method:

1. Hold the end of the belt with both hands and pull the belt out so that the mask can cover the nose and mouth area completely. Connect the fastener behind the neck to seal the mask and face.
2. Pull the end of the tape again and tighten it further.
3. Before use, check the mask to determine whether it is properly sealed.
4. In the course of use, when the user smells the odor or increases the inhalation resistance, the service life of the filter box has reached. Please replace the filter box or cotton wool immediately.

Note:

1. Do not use this set in the following situations:
1) The environment where the oxygen concentration is lower than 19.5%;
2) Environments with unknown nature of harmful environment.

2. When you feel a significant increase in breathing resistance or uncomfortable symptoms such as peculiar smell, cough, irritation, nausea, etc. during use, you should leave the harmful environment immediately, and check the suit, confirm and eliminate the fault before re-wearing and entering the harmful environment; No fault exists, effective filter element should be replaced：
1) There are vents on the upper and lower sides of the goggles frame. Good air permeability should be ensured to reduce moisture in the goggles and make wearing more comfortable.

CE Certificate